Products by Aldon Company, Inc.

Item #: 4014-02 When you positively have to stop a freight car or locomotive Derails are emergency stopping devices designed to guide the wheels of a freight car or locomotive off the rails. OSHA requires that every industrial siding be equipped with a derail to deny locomotive entry before...

Item #: 4014-01 When you positively have to stop a freight car or locomotive. Derails are emergency stopping devices designed to guide the wheels of a freight car or locomotive off the rails. OSHA requires that every industrial siding be equipped with a derail to deny locomotive entry before...

Item #: 4014-03 When you positively have to stop a freight car or locomotive — Derails are emergency stopping devices designed to guide the wheels of a freight car or locomotive off the rails. OSHA requires that every industrial siding be equipped with a derail to deny locomotive entry before...

Item #: 4014-18 When you positively have to stop a freight car or locomotive - Derails are emergency stopping devices designed to guide the wheels of a freight car or locomotive off the rails. OSHA requires that every industrial siding be equipped with a derail to deny locomotive entry before...

Item #: 4014-08-S Patented Design. (#7,753,317). Left-hand / Right-hand derailing in both directions from either rail. For 6-axle locomotives and freight cars. ◾ Fits rails 100-142 lbs. ◾ Use on Wood or Concrete Tie Tracks ◾ Do not use where speeds exceed 10 mph Watch our test and installation...

4014-06-S Patented Design. (#7,753,317) ◾ For use on wood or concrete ties. ◾ One direction derailing for use with 4-axle and 6-axle locomotives and all freight cars. Watch our test and installation video on the product page.

Item#: 4014-07-S For use on wood or concrete ties. U.S. Pat. # 7,753,317 Features: ◾ Light weight: 48 lbs ◾ Tool-free installation ◾ Safety anchor hook Do not use where speeds exceed 10 mph Fits rails from 90-142 lbs./yd. Tie Spacing: 18"-24" on center Blue derail sign and holder are included...

Item #: 4114-13 Wheel shover works with Retractable Derail to deflect both wheels off the rail. The addition of a Shover is recommended for difficult track conditions such as: curved track, sloped track, or track where switching speeds are above normal. Wheel shover is connected to the...

Item #: 4123-128 Year-round lubrication. GLIDEX can be brushed, sprayed, or poured on switch points, throw rods, etc. ◾ Not soluble in water: Resists rain and snow. ◾ No build-up of dirt or dust on switch stand moving parts. ◾ Non-toxic synthetic ingredients. 5 gallon Bucket. Weight 35...

Item #: 4124-106 For outdoor track accessory greasing needs. 4 gals./case Can only be shipped by motor freight under hazmat class. Weight 40 lbs.

Item #: 4123-79 Keep all moving parts of a switch operating smoothly. Spray tank holds 3 gallons of lubricant. Long-bristle broom works oil into crevices. Weight 10 lbs.

Sign plates are 12" x 15", and made of .080" aluminum with engineer grade retro-reflective coating. Weight: 1.5 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign...

Item #: 4123-80 Weight 2 lbs.

Item #: 4123-148 ◾ Mat comes in 100 foot lengths 59" wide for inside rails. ◾ Absorption capacity: 60 gallons. Weight 70 lbs.

Item #: 4123-130 ◾ Heats rail to draw joints together and promote rail bonding. ◾ Flammable gel in protective casing burns hotter (360°F) and longer (20 min.) than rope pull-apart. ◾ Sold in lots of four 10 ft. sections in metal safety can. Special flammable shipping regulations apply. ◾...

◾ 18" x 15" ◾ .080" aluminum ◾ Engineer grade retro-reflective coating ◾ Signs feature a picture to supplement the sign plate wording ◾ Fits any existing Aldon sign holder Weight: 2 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special...

Item #: 6SMAW-R Sign plates are 12" x 15", and made of .080" engineer grade retro-reflective aluminum. Weight: 1.5 lbs Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign...

Sign plates are 12" x 15", and made of .080" aluminum with engineer grade retro-reflective coating. Weight: 1.5 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates...

Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...

Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...

Item #: 4011-01 For exposed rail ◾ Works on all train rails from 75lb/yd to 141lb/yd and wheel diameters 28" - 44". ◾ Handle length: 28" Weight 13 lbs. Watch our demonstration video on the product page of our website.

Item # 4015-166 Switch (number) Sign Plate Mount these 7" x 13" signs on a tie by the switch stand. Weight: 1 lbs.

Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...

Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...

Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...

Item #: 4015-71 ◾ 10" diameter, round, printed on both sides of 0.08" aluminum. Weight: 0.75 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add...

Sign plates are 12" x 15", and made of .080" engineer grade retro-reflective aluminum. Weight: 1.5 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can...

Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates Weight: 3 lbs. We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or...

◾ Keep workers and switching crews aware of rail car status. ◾ Aluminum sign plate (.080” thick) lettered on both sides, with powerful rare-earth magnet that strong wind cannot dislodge. Sticks to side of car or end-strut. Handle makes removal easier ◾ Change signs as car status changes...

Item #: 4016-06 Uses the cushioning capacity of the tie and a wheel-bump feature to lift the wheel slightly off the rail to absorb momentum. Recommended for spur tracks where more protection is needed than a conventional car stop can provide. ◾ Do not install on grades. ◾ Use bumping post...

Item #: 4016-09 Lightweight freight car chocking skid. At 16 lbs. and 17-1/2" in length, this easy-to-carry rail skid is handy for chocking freight cars on flat track with low places, which the rail car tends to move towards. Not recommended for grades, as skid may not hold the load. The skid...

Item #: 4016-13 At 16 lbs and 17½ " long, this model skid is handy for chocking locomotive on flat track. The low-profile (4" tall) handle clears any wheel frame or brake shoe obstruction. Locomotive air and hand brake must be applied as soon as wheel has mounted skid. The skid alone will not...

Item #: 4016-03 Wedge holds bolted-together car stop to rail. Stop stands 15 inches above rail. Can be used as chock as well as stopping device. Tighten bolts periodically and re-hammer wedge if loosened. ◾ Car stop is assembled on head of rail by tightening 5 bolts and driving wedge from...

4118-14-I rail size: 90-130 lbs. INSIDE Weight 207 lbs. 4118-14-O rail size: 90-130 lbs. OUTSIDE Weight 165 lbs. 4118-15-I rail size: 131-152 lbs. INSIDE Weight 211 lbs. 4118-15-O rail size: 131-152 lbs. OUTSIDE Weight 190 lbs. An old and reliable design for two-way rerailing of locomotives...

Item #: 4024-54 Workers can easily carry heavy, bulky items with our 2-Man Carrying Pole. Perfect for rerailers and derails. Carry Pole is 8 feet long, made of steel tubing, with a pincer hook at the center. Maximum load: 250 lbs. Weight 26 lbs.

#4018-10: 20 tons/per wheel capacity for standard freight cars. Weight: 9,500 lbs. #4018-22: 40 tons/per wheel capacity for steel mill torpedo cars and other extra heavy railcars. Weight: 10,500 lbs. Diamond-shaped rerailer automatically rerails car wheels in both directions. Diamond panel...

#4018-11 20 tons/per wheel capacity for standard freight cars. Weight: 5,500 lbs. #4018-23 40 tons/per wheel capacity for steel mill torpedo cars and other extra heavy railcars. Weight: 6,050 lbs. SINGLE HALF DIAMOND for approaches to buildings, weigh scales, unloading pits. For 1-way rerailing....

No need to climb up on a ladder to apply railcar hand brake. User can tighten and release brakes, align car coupler knuckles, operate angle locks, and re-set end-of-train warning devices. Can be purchased with or without magnetic handle. Without Magnetic Handle 4123-104 "Short", 24"-...

Item #: 4017-01 Hand Car Mover. Car Mover multiplies worker's efforts through compound leverage. Includes handle. Flat track only. Weight 20 lbs. CAUTIONS: ◾ For use on flat track only. Do not use this product to push railcars up or down slopes. ◾ When moving a car, keep the foot engaged with...

Item #: 4017-02 Replacement handle for Item #: 4017-01 Handle Only. 54" long hickory. Weight 6 lbs.

𝗜𝘁𝗲𝗺 # 𝟰𝟬𝟭𝟱-𝟭𝟰𝟲 (Asphalt) 𝗜𝘁𝗲𝗺 # 𝟰𝟬𝟭𝟱-𝟭𝟱𝟲 (Concrete) Aldon's permanent, highly visible and all-weather Track Clearance Marker tells switching crews how far they can shove a car without "fouling" converging tracks. Left uncorrected, a fouled track will cause a collision with a...

𝟰𝟬𝟭𝟱-𝟭𝟰𝟰 (Yellow) 𝟰𝟬𝟭𝟱-𝟮𝟰𝟮 (Orange) Aldon's permanent, highly visible and all-weather Track Clearance Marker tells switching crews how far they can shove a car without "fouling" converging tracks. Left uncorrected, a fouled track will cause a collision with a passing train. ◾ Molded...

𝟰𝟬𝟭𝟱-𝟮𝟰𝟮 (Orange) 𝟰𝟬𝟭𝟱-𝟭𝟰𝟰 (Yellow) Aldon's permanent, highly visible and all-weather Track Clearance Marker tells switching crews how far they can shove a car without "fouling" converging tracks. Left uncorrected, a fouled track will cause a collision with a passing train. ◾ Molded...

Item #: 4115-01 ◾ Barricade-style, 7 in. diameter shatterproof Lexan lens. ◾ Uses two 6-volt Lantern batteries. ◾ Battery case bolts to light-bracket. ◾ On-off switch and photo-electric cell. ◾ Flashes 60 times/min. ◾ Other lens colors available. Weight: 2 lbs. Batteries NOT included

Item #: 4020-05 Our Gatemaster openers are compact, simple-to-use manual tools for hard-to-open gates. Through planetary gear reduction in the Gatemaster head, the worker's handle effort is multiplied 18-1/2 times — a considerable mechanical advantage. A maximum torque output of 3,200 ft.-lbs...

Item #: 4020-06 Our Gatemaster openers are compact, simple-to-use manual tools for hard-to-open gates. Through planetary gear reduction in the Gatemaster head, the worker's handle effort is multiplied 18-1/2 times for Gatemaster I — a considerable mechanical advantage. A maximum torque output of...

Item #: 4123-144 31" long Tie Plate Mover tool for safely sliding tie plates under rail. Weight: 5 lbs.

Item #: 4123-84 Weight 7 lbs.

Item #: 4124-14 Extend the life of your cross ties and insure good spike hold by inserting ALDON Tie Plugs into worn spike holes. ALDON Tie Plugs are 4-1/2" long and come 5 plugs to a stick. 500 piece bundle Weight 28 lbs.

Item #: 4123-149 19" wide panels for field sides of track (set of 2). Absorption capacity: 25 gallons. Provides absorbency and drip protection under railcars for a wide variety of petroleum-based products. Three-ply construction consists of top layer of needle-punched polypropylene felt, a...

Item #: 4124-08 The 3-gallon capacity HEATER keeps switchpoints dry in winter. The HEATER is placed between the ties under the tip of the point, with the flame just beneath the point. Temperature extremes may require more than one HEATER for each point. The flame should burn for 96 hours on a full...

Item #: 4124-29 ◾ Polyethylene pan locks to rail beneath tank cars and hopper cars. ◾ The pan holds up to 50 lbs of drips as hoses are connected. ◾ Do not use with acids. Weight 5 lbs.

Item #: 4124-30 ◾ Polyethylene pan locks to rail beneath tank cars and hopper cars. ◾ The pan holds up to 50 lbs of drips as hoses are connected. ◾ Do not use with acids. Weight 5 lbs.

Item #: 4015-74 ◾ 2 blades when assembled form 34" x 34" span. ◾ Each blade is .080 aluminum. 9" x 48" Weight: 20 lbs. Requires mounting brackets (sold separately, in pairs) Item #: 4115-96 Large Brackets for 4" dia. pole Item #: 4015-199 Small Brackets for 2-3/8" dia. pole

Item #: 4015-199 ◾ Need one pair of brackets per Crossbuck sign. ◾ Brackets sold in pairs. ◾ Aluminum brackets for 2-3/8" diameter pole. Weight 1 lb.

Item #: 4115-96 For Joint Bar Sockets. ◾ Aluminum brackets for 4" diameter pole. ◾ Brackets sold in pairs. Need one pair of brackets per Crossbuck sign. Weight: 2 lbs.

Item #: 4123-112 For Joint Bar Sockets. ◾ Powerful leverage and ratchet convenience in one wrench. ◾ Aluminum brackets for 2-3/8" diameter pole. ◾ Handle is 38" long, with 1" square drive. Weight: 11 lbs.

Item #: 6008 Replaceable Spurs give your chocks four times the life of any other chock. When the spur dulls from use, remove the spur and turn it to a new edge. Extend the life of your wheel chocks by turning the spurs three times then order new spurs instead of new chocks. Weight: 0.25 lbs.

Item #: 4015-293 Mount in front of overhead doorways or use on any flush rail application to keep your employees safe. ◾ When impacted, Flex-E Form sign holders are designed to spring back to an upright position. ◾ Secured by three powerful neodymium magnets and removed in seconds with...

Item #: 4015-93 Spur Track Guardian Package Includes: ◾ Hinged sign holder, hand-lifted (see 4015-122 for foot-operated "Mousetrap" feature) ◾ Blue 12" x 15" 0.080 aluminum sign plate. ◾ Solar Powered flashing blue light. Shock-proof and NEMA-4X rain and dust proof. ◾ Gravity switch...

Item #: 4015-180 ◾ Rare earth 60 lb. pull magnet keeps lantern secure on top of rail. ◾ Brilliant 4 LED flashing blue light operates up to 22 nights on full battery charge. ◾ Lantern must be used in upright position. ◾ Light turns off when lantern is titled 45 degrees or more. ◾ To...

Item #: 4015-06 ◾ Tie plate base is spiked to tie. ◾ Hinged sign holder folds down in either direction. ◾ Two track spikes are included. ◾ Lockable. Sign plate and padlock sold separately. Weight 10 lbs.

Item #: 4015-93 Day or night, always on duty. OSHA-mandated blue sign and blue light provide round the clock warning that the spur track is off limits to traffic unless plant workers authorize entry. Spur Track Guardian Package Includes: ◾ Hinged sign holder, hand-lifted (Item #: 4015-122 for...

Item #: 4015-230 ◾ Use the rail as a sign holder. ◾ Powerful rare earth magnet keeps holder in place on the rail. ◾ Accepts 12" x 15" sign plate. Weight: 5 lbs. Sign plate NOT INCLUDED. Standard wording OSHA mandated sign plates can be ordered from our website: aldonco.com

Item #: 4015-207 ◾ For Racor manual switch stands: 22E and 36E. ◾ Fits 1-1/2" square adapter sleeve. ◾ Sold in set of 1 red and 1 white plate. Weight: 2 Lbs. Adapter sleeve is sold separately.

Item #: 4015-206 ◾ For Racor manual switch stands: 22E and 36E. ◾ Fits 1-1/2" square adapter sleeve. ◾ Sold in set of 1 red and 1 green plate. Weight: 2 Lbs. Adapter sleeve is sold separately.

Item #: 4115-171 ◾ For Racor manual switch stand models: 20P, 22E, and 36E. ◾ Bolts and nuts included. ◾ 1-1/2" square x 8-1/2" tall. Weight 2 lbs.

Item #: 4115-165 For manual switch stands 1004 and 1004 ARS. Bolts and nuts not included. Weight 1 lb.

Item #: 4015-224 ◾ Kit Includes mounting platform, 4 sign plates, and mounting bolts. ◾ Mounting sleeve fits most switch stands. ◾ Also available in Illuminated model (Item# 4015-224-I). Weight 10 lbs If you have any questions please contact our office.

Item #: 4015-224-I ◾ Kit Includes mounting platform, 4 sign plates, and mounting bolts. ◾ Sign plates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. Specifications ◾ Symbols are identifiable from as far as 250 feet. All LEDs have narrow beam widths for maximum...

Item #: 4123-71 ◾ Lift 39 foot section of railroad "T" rail up to 155 lbs./yd. ◾ Do not drag rail. Lift only. ◾ Capacity 6,000 lbs. Weight 72 lbs.

Item #: 4011-02 ◾ Works on all train rails from 75lb/yd to 141lb/yd and wheel diameters 28" - 44". ◾ Handle Length 28" Weight: 10 lbs.

Item #: 4123-125 Capacity 8 tons. Fits all standard frogs. (Not for self-guarded frogs.) Weight 46 lbs.

Item #: 4123-14 Weight 18 lbs.

Item #: 4123-15 21" jaw opening Weight 10 lbs.

Item #: 4124-60 Jaw opening 2-3/8" fits hex nut on railcar air line. Weight: 9 lbs

Item #: 4123-132 Hold spike in place with this magnetic tool. Weight 1 lb.

Item #: 4116-10 Bolts to bumping post. Absorbs 80,000 lbs. impact. Fixture to attach Spring Cushioned Head to a concrete wall is available. Contact our office for information: Phone: 847.623.8800 Email: [email protected]

Item #: 4116-08 For longer trains and frequently used side tracks. ◾ Bolts through rails. ◾ Customer can install middle rails for track strength. ◾ Leave 3 to 4 ties worth of rail length behind post. Standard color is oxide primer red. Can be painted yellow at an additional cost. Weight...

Item #: 4116-09 For longer trains and frequently used side tracks. ◾ Bolts through rails. ◾ Customer can install middle rails for track strength. ◾ Leave 3 to 4 ties worth of rail length behind post. Standard color is oxide primer red. Can be painted yellow at an additional cost. Weight...

Item #: 4015-05 NO DRILLING REQUIRED ◾ Clamps to base of rail. ◾ Holder folds down flat. ◾ Can be padlocked in active position (padlock not included). Weight 10 lbs. Sign plate not included. Visit our website to view our full line of sign plates.

Item #: 4015-188 ◾ For temporary installation in track ballast. ◾ Sign holder is 1" sq. steel tube, 48" long, drilled for 12"x15" OSHA blue flag signs. Hammer the sharp 12" long spear point into the ground using the included hammer punch. To remove, strike square socket with hammer and pull...

Item #: 4015-57 ◾ Solar light with 360° visibility. ◾ Flashes 60 times per minute. Brilliant 6 LED light visible for a mile. ◾ Solar battery operates 8 consecutive nights without recharging. ◾ Fully recharges with 2 sunny hours or 8 cloudy hours. ◾ External on/off push-button conserves...

◾ Hemmed sleeve, for 18" long dowel staff. ◾ Size 12" x 15". ◾ Flags are priced and sold individually, not as a pair. Weight 1 lb. Item: 4015-12 (Blue) Item: 4015-22 (Green) Item: 4015-91 (Orange) Item: 4015-20 (Red) Item: 4015-92 (White) Item: 4015-21 (Yellow) Item: 4015-120 (Yellow/Red) Item:...

Item #: 4024-282 ◾ Our Hanging Tool Tray (With Lid) provides additional protection by keeping small tools safe and dry from the earth’s natural elements when working on tank and hopper cars. ◾ Tray legs fit up to 2" diameter railings on landing platforms and gangways. ◾ Welded...

Item #: 4024-280 A convenient place to keep small tools when working on the roofs of tank cars and hopper cars. ◾ Tray legs fit up to 2" diameter railings on landing platforms and gangways. ◾ Welded aluminum with durable yellow powder coat finish. Drain holes in each corner allow for...

Item #: 4024-08 ◾ Flashing amber light and loud horn alert workers that a car is in motion. ◾ Compact unit mounts to hole in coupler. ◾ When car moves, light and horn are instantly activated. ◾ When car stops, light and horn will continue active for about two seconds. ◾ High impact...

Item #: 4024-303 For Switch Stand Throw Handles Switch stand throw handles must always be kept padlocked or secured with safety hook, to prevent accidental or unauthorized movement of switch points. An unsecured switch stand throw handle can leap up with great force if a locomotive enters a...

Item #: 4015-135 ◾ Solar-powered blue flashing light includes mounting bracket to attach to any square or flat sign holder. ◾ Shock proof and NEMA-4X rain and dust proof. Gravity switch (light turns off at 45° angle). Note: The mounting bracket for attaching to a derail sign holder is...

Item #: 4015-205 ◾ Solar-powered combination blue flashing light on top and white flashing light below. ◾ Both are brilliant LED lights visible for over a mile. ◾ White light illuminates sign plate. ◾ Includes mounting bracket to attach to any square or flat sign holder. ◾ Shock proof...

Item #: 4015-237 Powerful rare earth magnet grips like iron to side of car or end-strut. ◾ 360° solar powered blue light projects 12" from side of rail car. ◾ Light fully re-charges with two hours of sunlight or eight hours of cloudy skies. ◾ On/Off button on bottom of light. ◾ Gravity switch...

Item #: 4123-81 ◾ Hydraulic track jack provides low handle effort. ◾ Can be used for lifting (vertical) only. Not to be used for pushing (horizontal) applications. ◾ Inverted cylinder design helps keep water and debris out of the jack. Specifications: ◾ Lifting Capacity: 10-ton ◾ Stroke:...

Item #: 4123-65 ◾ Mechanical track jack provides low handle effort. Can be used for lifting (vertical) or pushing (horizontal) applications. ◾ Forged and heat treated components for strength and long service life. Does not accept lining bar for handle. ◾ Does not accept lining bar for...

Item #: 4123-63 Mechanical track jack provides low handle effort. Can be used for lifting (vertical) or pushing (horizontal) applications. Forged and heat treated components for strength and long service life. Quick-trip mechanism allows load to be instantly dropped. Accepts any 1-1/2” square...

Item #: 4123-64 Mechanical track jack provides low handle effort. Can be used for lifting (vertical) or pushing (horizontal) applications. Forged and heat treated components for strength and long service life. Quick-trip mechanism allows load to be instantly dropped. Accepts any 1-1/2” square...

Item #: 4022-14 ◾ Continuous gauging with 2" clearance above rail. ◾ Rolls through switches and rail crossings without stopping. ◾ 2 sets of six roller bearings on each side provide gauging control even when passing over the gap between the rail and the V of the frog. ◾ Horizontal...

Item #: 4022-12 ◾ Attaches with Velcro to our: Economy Rolling Track Gauge Reader (Item #: 4022-10) and Roadmaster Rolling Gauge Reader (Item #: 4022-14). ◾ Liquid crystal display has 1/2" numerals readable from 10 feet away. ◾ Measures elevation in 10ths of an inch per foot. Weight 5...

Item #: 4022-10 ◾ Measure up to 2 inches gauge variation while walking down the track. ◾ Spring-action telescopic assembly expands and contracts as gauge changes. ◾ Worker can read gauge while walking by looking down at a lens and gauge scale. ◾ Steel roller bearings measure gauge...

Item #: 4015-180 ◾ Rare earth 60 lb. pull magnet keeps lantern secure on top of rail. ◾ Brilliant 4 LED flashing blue light operates up to 22 nights on full battery charge. ◾ Lantern must be used in upright position. Light turns off when lantern is titled 45 degrees or more. ◾ Solar...

Item #: 4015-257\t Reflective red vinyl marker with magnetic backing. Place on web or base of rail. SIZE: 2.75" x 12"

Item #: 4022-05 Weight 15 lbs.

Item #: 4024-03 ◾ Measure track curvature or visually judge the straightness of straight rail. ◾ Steel paddles lock to rail head. The custom 12" ruler measures the space between the rail head and the red-marked midpoint of a 62 ft. cord. ◾ Each inch of space between rail and string...

Item #: 4015-03 Gooseneck handle fits into hole in coupler. Sign plate NOT INCLUDED. Visit aldonco.com to view all of our OSHA mandated sign plates. Weight 4 lbs.

Item #: 4015-23 Steel holder, clamps to rail head. Twin sockets accept 7⁄8" dia. flag holder. Weight 7.5 lbs. Flags sold separately. View our product that displays our assorted colors of Nylon Flags.

Item #: 4124-60 Jaw opening 2-3/8" fits hex nut on railcar air line. 9 lbs

Item #: 4025-02 ◾ Two-piece construction reduces carrying weight. ◾ Deck of expanded metal provides a non-skid surface. ◾ Cart comes with U-shaped push handle. ◾ Wheels are 6" dia. aluminum with insulated bearings. ◾ Deck 49" wide" x 50" long. For use on flat track only. Always push cart,...

Item #: 4025-03 ◾ Constructed of 6061T6 alloy aluminum. ◾ Deck area 48" square expanded aluminum grid. ◾ Wheels are 6" dia. aluminum insulated. ◾ Parking brake for safety. For use on flat track only. Always push cart, never pull. 5,000 lbs. capacity (yet each cart-half weighs 49...

Item #: 4022-26 ◾ Battery-powered laser unit measures gauge to within 1/32" accuracy. ◾ Aluminum bracket with two rare-earth magnets holds Spot Check on rail. ◾ Two adjusting screws raise or lower laser beam 20° with laser range of 135 feet. ◾ Worker aims laser beam at a point 5/8" below...

Item #: 4016-24 ◾ Custom-sized for a specific crane rail size and section. ◾ Steel wedge dogs clamp to rail head for positive anchoring. ◾ Pull horizontally to drag or position 39-foot lengths of rail. ◾ Pulling direction must always be in the direction shown above, so wedge drives itself...

Item #: 4123-112 Powerful leverage and ratchet convenience in one wrench. Handle is 38" long, with 1" square drive. Weight 11 lbs. Visit aldonco.com to view our wide range of sockets.

Item #: 4124-230 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-231 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-232 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-233 Size: 1-9/16" Broach Depth: 7/8" Item #: 4124-234 Size: 1-5/8" Broach Depth: 7/8" Item #: 4124-235 Size: 1-11/16" Broach...

Item #: 4124-243 Size: Size: 1-1/4" Broach Depth: 11/16" Item #: 4124-244 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-245 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-246 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-247 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-248 Size: 1-9/16" Broach...

Item #: 4124-141 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-142 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-112 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-126 Size: 1-9/16" Broach Depth: 7/8" Item #: 4124-145 Size: 1-5/8" Broach Depth: 7/8" Item #: 4124-124 Size: 1-3/4" Broach Depth:...

Item #: 4124-110 Size: 1-1/4" Broach Depth: Item #: 4124-140 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-127 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-111 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-143 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-144 Size: 1-9/16" Broach Depth:...

Item #: 4124-260 Size: 1-1/4" Broach Depth: 11/16" Item #: 4124-261 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-262 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-263 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-264 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-265 Size: 1-9/16" Broach Depth:...

Item #: 4124-129 Size: 1-1/4" Broach Depth: 11/16" Item #: 4124-02 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-137 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-156 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-03 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-04 Size: 1-9/16" Broach Depth:...

Item #: 4015-32 ◾ Small but brilliant flashing mini-light with magnet base/steel clip. ◾ Fits all derails and sign holders, except: 4015-02, 4015-03, and 4015-04. Weight: 2 oz.

Item #: 4011-10 Aldon Company is the originator of the replaceable traction spur railroad wheel chock. All steel construction railcar wheel chocks with replaceable rail biting spur for securing freight cars and locomotives on exposed track . The traction spur can be rotated to a new edge or...

Item #: 4124-49 ◾ The Sliding Rail anchor locks over the head of the rail and moves freely, giving complete freedom of movement and fall protection. ◾ For 90-136 lbs./yd. rail. Weight 6 lbs.

Item #: 4124-210 Combination tool measures head wear vertically and horizontally to an accuracy of 1/32 of an inch. Rail sizes 112, 115, 119, 132, 133, 136 and 141 lbs./yd. Made of aluminum. Weight 5 lbs.

Item #: 4015-07 ◾ Steel holder clamps to rail head for easy on and easy off. ◾ Padlock included ◾ Padlocked holder cannot be removed from rail. ◾ Fits rail sizes from 90 to 141. Weight 10 lbs. Sign plate NOT INCLUDED. Visit our website to view and order standard OSHA-mandated sign plates from...

Item #: 4015-10 ◾ Clamp-on steel sign holder fits rails 75 lbs./per yard and up. ◾ Anti-roll bars hold sign holder to rail in 75 mph wind. ◾ Easy-Reach locking arm. ◾ Brass padlock included. Weight 10 lbs. Sign plate NOT INCLUDED. Visit our website to view and order standard OSHA-mandated...

Item #: 6SMAW-B Sign plates are 12" x 15", and made of .080" aluminum with engineer grade retro-reflective coating. 1.5 lbs.

Item #: 4016-01 High-security wheel blocking. Clamps grip rail head through wedge action. ◾ Do not use with overhead cranes. ◾ Do not use for impact stopping. ◾ Apply brakes before installing blocks. ◾ Use one chock at each end of the car. ◾ Use on flat track. (see additional cautions...

Item #: 4020-03 Six feet long and made of 1-3/8" in. dia. high strength steel, with an angle at one end to clear the side of car. Operator should not jump or stand on the bar. Weight 30 lbs.